Right Angle Tools
2-21
COUNTERSINK
STYLE AR STYLE BR
INTERNAL THREAD
STYLE BR MODIFIED
FOR OTHER CUTTER STYLES, FURNISH CUTTER DRAWING
➀
Stand Off:
–––––––––––––––
inches. (Minimum chip clearance .375”)
➁
Drill Bushing Tip Outside Diameter: ______________________________ inches.
➂
Drill Bushing Series (Circle One):
• 2 Lock — 22,000, 23,00 & 24,000 Series
• 3 Lock — 25,000, 26,000 Series
➃
Cutter Information:
• Style (reference drawings at bottom of this page):__________________________________.
• Furnish cutter Drawing or Dimensional Data (reference drawings at bottom of this page)
A ______________ F ______________
B ______________ T ______________ External Thread
C ______________ or
D ______________ T ______________ Internal Thread
E ______________ Fluid Spindle: Yes ____ No ____
➄
Nose Indexer: Yes_____ No_____
➅
Quackenbush Tool Model No. ___________________________________________________________________.
Depth and Dwell attachments are designed for
each tooling application. The following
information is required in order to obtain a
quotation from the factory, Contact your local
Quackenbush Specialist for assistance.
NOTE: • Important— If chip escape reliefs are required on the sensing sleeve, they must be specified when
ordering. A drawing must be provided showing the exact location and type openings required.
• Some applications involving long cutters require that the tips of the cutter extend beyond the Dwell and
Depth Attachment when the spindle is fully retracted.
Comments to this Manuals