Right Angle Tools Accessories
2-30
How to order Spindles for Right Angle Tools
INFORMATION REQUIRED TO ORDER SPINDLES:
➀
OVERALL LENGTH:
Stroke __________ + 2.87” (73mm) for 15QDA-RA = __________ Overall Length
Stroke __________ + 3.50” (89mm) for 140QGDA-RA-SU-MS = __________ Overall Length
Stroke __________ + 3.75” (95mm) for 158QGDA-RA = __________ Overall Length
Stroke __________ + 4.93” (125mm) for 230QGDA-RA-MS = __________ Overall Length
Stroke __________ + 4.75” (121mm) for 230QGDA-RA-GD = __________ Overall Length
Stroke __________ + 4.93” (125mm) for 230QGDAB-MS = __________ Overall Length
➁
STANDARD SPINDLE THREAD RELIEF
➃
END PREPARATION OF SPINDLE:
.875” for 15QDA-RA and 140QGDA-RA 䡺 INTERNAL THREAD:
1” for 158QDA-RA (Provide drawing specifying thread, depth, angle and
(.5625” flange width for 230QGDA-RA-MS) counterbore depth if required)
1” for 230QDA-RA-GD 䡺 STRAIGHT BORE:
NOTE: Specify if Thread Relief is other than standard. Bore Diameter ____________ inches
Depth ___________________ inches
➂
OIL HOLE REQUIRED? 䡺 Yes 䡺 No 䡺 INTERNAL MORSE TAPER (for 158 and 230 Models only)
No. 1 Morse Taper 䡺
NOTE: Spindle guards are highly recommended and are No. 2 Morse Taper 䡺
available for all spindles. Please specify when ordering.
How to order Tool Noses for Right Angle Tools
INFORMATION REQUIRED TO ORDER TOOL NOSES:
➀
TOOL SERIES
䡺 15QDA-RA (1”-20 Nose Thread)
䡺 158QGDA-RA (1.5625”-20 OR 2.25”-20 Nose Thread)
䡺 230QGDA-RA-MS (1.5625”-20 OR 2.25”-20 Nose Thread)
䡺 230QGDA-RA-GD (1.5625”-20 OR 2.25”-20 Nose Thread)
➁
DIAMETER
Standard Sizes - 1.1875” OD
15QDA-RA - 1.5625”, 2” and 2.375” OD
230QGDA-RA-MS - 1.5625”, 2” and 2.375” OD
230QGDA-RA-GD - 1.56256”, 2” and 2.375” OD
➂
OVERALL LENGTH
➃
DRILL BUSHING SERIES
NOTE: Drawings for special tool noses must be provided when ordering.
BUSHING QUACKENBUSH NOSE
SERIES THREAD (ID)
21000 .75” - 16
22000 1” - 14
23000 1.25” - 12
24000 1.5” - 12
25000 2” - 16
Bushings are not furnished with
Quackenbush Tools.
DRILL BUSHING
Comments to this Manuals