Cooper Tools Quackenbush 158QGDAV Operations Instructions Page 38
- Page / 137
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
38
230QGDA-RAC-SU-MS Series
Capacity:
Aluminum – 1.375” (34.9mm)
Titanium – 1” (25.4mm)
Steel – 1” (25.4mm)
Stroke:
Min. – .125” (3.18mm)
Max. – Unlimited
n 230 series motor develops 2.3 nominal horsepower.
n Single push-button starts motor and engages drill
feed mechanism.
n Externally replaceable shear pin provides gear
protection if chips pack or cutter binds.
n Rapid advance with manual speed control and low torque
clutch protection if cutter advances into workpiece.
n Precision depth control with automatic retract after
preset dwell period. (When equipped with depth
sensing nose assembly)
n Positive depth stop is adjustable for desired hole depth.
n Easily adapted to oil hole drilling using a solid spindle and
a fluid chuck, or with the use of an oil hole spindle and a
fluid swivel.
n Cutter automatically retracts if tool senses thrust overload.
n Motor shuts off automatically after retract.
n Auxiliary manual retract lever.
*Weight and Length will vary depending on Gear Train.
NOTE:
Tool model with either the 2.25”-20 L.H. External Nose Attachment Thread
(Standard) or the 1.5625”-20 Internal Thread (Special) must be specified
when ordering.
Rated tool performance at 90 PSIG measured at tool inlet with motor running.
When selecting speeds and feeds, see page 3.
SEE PAGES 5-7 FOR SAFETY PRECAUTIONS.
WHEN ORDERING TOOL:
Tool nose and spindle must be specified. Standard tool nose, spindle guard
and spindle are provided when ordered with tool. Select one tool nose and
one spindle. Specify EITHER 2.25”-20 External Thread OR
1.5625”-20 LH Internal Thread.
230QGDA-RAC-SU-MS Right Angle No Limit 17 7.7 20.75 527 50, 65, 80, .0005, .001, .002, .5” NPT .5”
100, 125, .003, .0045,
160, 205 .006, .008, .012
230QGDA-RAC-SU-MS Right Angle No Limit 15.75 7.1 18.75 476 260, 320, 390, .0005, .001, .002, .5” NPT .5”
440, 550, 640, .003, .0045,
770, 1000 .006, .008, .012
230QGDAV-RAC-SU-MS Right Angle No Limit 17.5 7.9 21.25 549 50/125 .0005, .001, .002, .5” NPT .5”
100/250 .003, .0045,
.006, .008, .012
230QGDAV-RAC-SU-MS Right Angle No Limit 16.25 7.4 19.25 489 210/520 .0005, .001, .002, .5” NPT .5”
420/1000 .003, .0045,
.006, .008, .012
Model
Motor
Maximum Stroke Weight* Length*
Spindle Feed Per
Inlet
Minimum
Configuration
in. mm lbs kg in. mm
Speeds Revolution
Hose Size
230QGDAV-RAC-SU-MS
Right Angle Tools
- Aerospace Industry 1
- Advanced Drilling Equipment 2
- Table of Contents 2
- Lubrication Products 7
- Warranty 7
- Conversion Table 10
- Cut Up To 11
- 60% Off 11
- Drill Cycle 11
- New Quackenbush 12
- Adaptive Drilling System 12
- The Leader In 13
- Aerospace Drilling 13
- Specifications 14
- Positive Feed Tools 15
- ➀ connected directly 16
- B – Radius 17
- In-Line Tools 18
- Standard Tool Noses 27
- Adapter Kits 27
- Fluid Spindle Assemblies 27
- Standard Tool Nose 29
- Standard Spindles 29
- Right Angle Tools 30
- SPINDLES (Select One) 33
- STEEL TOOL NOSES (Select One) 33
- 1/2–22 L.H 33
- STANDARD SPINDLES 35
- STANDARD STEEL TOOL NOSE 37
- STANDARD TOOL NOSE 39
- STANDARD SPINDLE 39
- COUNTERSINK 41
- STYLE AR STYLE BR 41
- INTERNAL THREAD 41
- STYLE BR MODIFIED 41
- Positive Feed Accessories 44
- 45
- Peck Feed 46
- Equal Drill Time 47
- Drill Capacities 48
- Peck Drills 49
- S 50
- HT4 Peck Drill 52
- Peck Drills Accessories 53
- PL-510 DRILL POINT LUBRICATOR 55
- Signal Air 55
- Line Air 55
- Self-Colleting 56
- Introduction 57
- Jig Collet Foot Tooling 58
- Concentric Collet Tooling 58
- Self Colleting Machines 59
- Template Boss 63
- Collets and Mandrels 63
- P2 Drill Point Lubricator 63
- Vacuum Pickup Attachment 63
- 136SC Q-Matic 64
- Self-Colleting Drill Motor 64
- Small Large 66
- Manual Fill 631878 66
- Template Sink 67
- Hole Dia. Dia 67
- SELF-COLLETING DRILL: 68
- 120SC-112-TF 68
- Manual Fill 641109 641081 70
- Template Sink Boss Boss 71
- B C With .150 With .200 71
- Drill Lock Bushing Foot Model 74
- Drill Jig Collet Foot Model 74
- Standard Large 75
- Mist Lubricator Assemblies 77
- 641530 220V/AC 78
- Specialty 79
- Doler CD4 81
- Quackenbush 60 QBSF-5 81
- Back Spotfacer 81
- Specialty Tools 82
- MIN .344 - .212 83
- MAX .679 - .500 83
- MIN .312 .343 .300 83
- MAX 1.000 1.125 1.000 83
- PA & PB Angle Drills 84
- TOOL SELECTION: 85
- Taper-Lok Nosepiece 87
- SPECIFICATIONS: 89
- Depth Adjustment Area 91
- Vacuum Clamping Foot 91
- 70QVBSF-7 Back Spotfacer 93
- Specialty Tools Accessories 96
- ADVANCED DRILLING EQUIPMENT 98
- Cutter Mounting Styles 101
- Split point is standard 102
- Microstop 104
- Drill Cages 104
- Basic Drill-Cage 105
- Nylon Nose Piece 90.825.005 105
- Microstop Drill‑Cage 105
- Code REP NB 106
- Description 106
- Reference Index Quantity 106
- M6 x 1 Metric 107
- RBI 206 109
- Nylon Nose Piece 90.825.020 111
- RBI 256 113
- M8 x 1 Metric 117
- RBI 307 121
- Basic Drill-Cage + Adaptor 123
- Mounting Base 90.815.150 123
- Mounting Base 90.815.155 123
- Assembly Codification 126
- RB 356 HP 21 127
- RB 356 HP 38 127
- Adaptations 127
- Reaming + Countersinking 128
- Application 128
- Drilling + Countersinking 128
- Drilling Application 128
- 1/4” ‑ 28 Inches 129
- RB 356 HPI 21 131
- RB 356 HPI 38 131
- RB 356 HP 58 133
- RB 356 HPI 58 135
- COPYRIGHT © 137
Related products and manuals for Power drills Cooper Tools Quackenbush 158QGDAV
(28 pages)© 2020, manymanuals.com. All rights reserved. | 1.114 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals