Cooper Tools Quackenbush 158QGDAV Operations Instructions Page 73
- Page / 137
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
73
180SC-225 Q-MATIC SELF-COLLETING DRILL
MOTOR WITH RIGHT-HAND TEMPLATE FOOT
180SC-225 Q-Matic Self-Colleting Drill Motor
Drill Capacity: .5625” (14.3mm)
Countersink Capacity: .875” (22.2mm)
Feed Stroke: 2.25” (57.2mm)
Clamp Stroke: .875” (22.2mm)
n Semi-automatic self-colleting tool has automatic
clamp/drilI/retract cycle.
n Air motor, clamping and retract mechanism are
air-operated; feed rate controlled by external
hydraulic feed control cylinder.
n Tool has feed stroke of 2.25” (57.2mm); collet
stroke of .875”
n Variable foot spacing is adjustable from 1.00 in.
minimum through 3.50 in. maximum.
n Drill point coolant port is provided in pressure foot.
n Trigger lock feature permits tool to cycle without
constant operator attention.
n Spindle continues to rotate in forward direction
while tool retracts.
n Tool stays clamped to workpiece until operator
releases trigger locks.
Rated tool performance at 90 PSIG measured at
toll inlet with motor running.
INFORMATION REQUIRED FOR ORDERING
SELF-COLLETING DRILL:
1. TOOL RPM
2. TYPE SPINDLE REQUIRED (Exact information
concerning the cutter to be utilized in the
drilling application must be provided in order
to determine the proper spindle configuration.
A drawing of the cutter should be provided for
each application.)
3. FOOT TYPE REQUIRED:
• Template Foot Right Hand OR Left Hand
• Jig Collet Foot Depth Sensing
OR Non-Depth Sensing
• Drill Lock Bushing Foot 21000 series
OR 22000 Series Bushing
4. TOOLING INFORMATION
• Template Foot Models
Template Boss
Collet/Mandrel Assembly
• Jig Collet Foot Models
For depth sensing models, the stand-off
distance must be provided.
Collet/Mandrel Assembly
180SC-225 2.25 in .5 in Min. 1 min. per in. 14.5 6.52 240, 420, 650, 850 Min: 1 in (25.4mm) .375” NPT .5”
(57mm) (12.5mm) Max. 5 sec. per in. 1050, 2000, 3100 Max. 3.5 in (89mm) (12.7mm)
4900, 6300, 12500,
21,000
Model
Stroke
Feed Rate
Weight w/steel foot
Spindle Variable Distance
Inlet
Minimum
Feed Collet lbs kg
Speeds (RPM) Collet to Drill
Hose Size
Self Colleting Machines
- Aerospace Industry 1
- Advanced Drilling Equipment 2
- Table of Contents 2
- Lubrication Products 7
- Warranty 7
- Conversion Table 10
- Cut Up To 11
- 60% Off 11
- Drill Cycle 11
- New Quackenbush 12
- Adaptive Drilling System 12
- The Leader In 13
- Aerospace Drilling 13
- Specifications 14
- Positive Feed Tools 15
- ➀ connected directly 16
- B – Radius 17
- In-Line Tools 18
- Standard Tool Noses 27
- Adapter Kits 27
- Fluid Spindle Assemblies 27
- Standard Tool Nose 29
- Standard Spindles 29
- Right Angle Tools 30
- SPINDLES (Select One) 33
- STEEL TOOL NOSES (Select One) 33
- 1/2–22 L.H 33
- STANDARD SPINDLES 35
- STANDARD STEEL TOOL NOSE 37
- STANDARD TOOL NOSE 39
- STANDARD SPINDLE 39
- COUNTERSINK 41
- STYLE AR STYLE BR 41
- INTERNAL THREAD 41
- STYLE BR MODIFIED 41
- Positive Feed Accessories 44
- 45
- Peck Feed 46
- Equal Drill Time 47
- Drill Capacities 48
- Peck Drills 49
- S 50
- HT4 Peck Drill 52
- Peck Drills Accessories 53
- PL-510 DRILL POINT LUBRICATOR 55
- Signal Air 55
- Line Air 55
- Self-Colleting 56
- Introduction 57
- Jig Collet Foot Tooling 58
- Concentric Collet Tooling 58
- Self Colleting Machines 59
- Template Boss 63
- Collets and Mandrels 63
- P2 Drill Point Lubricator 63
- Vacuum Pickup Attachment 63
- 136SC Q-Matic 64
- Self-Colleting Drill Motor 64
- Small Large 66
- Manual Fill 631878 66
- Template Sink 67
- Hole Dia. Dia 67
- SELF-COLLETING DRILL: 68
- 120SC-112-TF 68
- Manual Fill 641109 641081 70
- Template Sink Boss Boss 71
- B C With .150 With .200 71
- Drill Lock Bushing Foot Model 74
- Drill Jig Collet Foot Model 74
- Standard Large 75
- Mist Lubricator Assemblies 77
- 641530 220V/AC 78
- Specialty 79
- Doler CD4 81
- Quackenbush 60 QBSF-5 81
- Back Spotfacer 81
- Specialty Tools 82
- MIN .344 - .212 83
- MAX .679 - .500 83
- MIN .312 .343 .300 83
- MAX 1.000 1.125 1.000 83
- PA & PB Angle Drills 84
- TOOL SELECTION: 85
- Taper-Lok Nosepiece 87
- SPECIFICATIONS: 89
- Depth Adjustment Area 91
- Vacuum Clamping Foot 91
- 70QVBSF-7 Back Spotfacer 93
- Specialty Tools Accessories 96
- ADVANCED DRILLING EQUIPMENT 98
- Cutter Mounting Styles 101
- Split point is standard 102
- Microstop 104
- Drill Cages 104
- Basic Drill-Cage 105
- Nylon Nose Piece 90.825.005 105
- Microstop Drill‑Cage 105
- Code REP NB 106
- Description 106
- Reference Index Quantity 106
- M6 x 1 Metric 107
- RBI 206 109
- Nylon Nose Piece 90.825.020 111
- RBI 256 113
- M8 x 1 Metric 117
- RBI 307 121
- Basic Drill-Cage + Adaptor 123
- Mounting Base 90.815.150 123
- Mounting Base 90.815.155 123
- Assembly Codification 126
- RB 356 HP 21 127
- RB 356 HP 38 127
- Adaptations 127
- Reaming + Countersinking 128
- Application 128
- Drilling + Countersinking 128
- Drilling Application 128
- 1/4” ‑ 28 Inches 129
- RB 356 HPI 21 131
- RB 356 HPI 38 131
- RB 356 HP 58 133
- RB 356 HPI 58 135
- COPYRIGHT © 137
Related products and manuals for Power drills Cooper Tools Quackenbush 158QGDAV
(28 pages)© 2020, manymanuals.com. All rights reserved. | 0.596 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals